Series05266400
VDI 40 Right Angle/Radial Offset Driven Tool (05266400) from Mario Pinto
Shell-Mill DIN138 22 - External coolant (LT-A VDI40 DIN138-22 OFR H90OK)
| Machine Manufacturer | OKUMA |
|---|---|
| Machine Model | ESL 10 -- (Disk-Type 12ST - VDI 40) |
| Machine Model | GENOS L 300 E M -- (Disk-Type 12ST - VDI 40) |
| Machine Model | GENOS L 300 M MW -- (Disk-Type 12ST - VDI 40) |
| Machine Model | LB 15 II M -- (Disk-Type 12ST - VDI 40) |
| Machine Model | LB 15 M -- (Disk-Type 12ST - VDI 40) |
| Machine Model | LB 300 M -- (Disk-Type 12ST - VDI 40) |
| Machine Model | LB 300 MW (USA MARKET) -- (Disk-Type 12ST - VDI 40) |
| Machine Model | LR 15 M -- (Disk-Type 12ST - VDI 40) |
| Machine Model | LU 15 M -- (Disk-Type 12ST - VDI 40) |
| Machine Model | LU 300 M -- (Disk-Type 12ST - VDI 40) |
| Tool Type | Tool holder offset angle 90° |
| Coolant | External coolant |
| Turrent Mount | VDI 40 |
| Tool Output | Shell Mill (DIN 138) |
Listed under: Driven Tools, VDI 40, Tool holder offset angle 90°, Driven & Static Tools
Choose a variant below to see its availability and add it to your quote.
Choose your variant
05266400
Made to order: typically a few weeks
Fits these machines
(10)- OKUMA ESL 10VDI 40
- OKUMA GENOS L 300 E MVDI 40
- OKUMA GENOS L 300 M MWVDI 40
- OKUMA LB 15 II MVDI 40
- OKUMA LB 15 MVDI 40
- OKUMA LB 300 MVDI 40
- OKUMA LB 300 MW (USA MARKET)VDI 40
- OKUMA LR 15 MVDI 40
Show all 10 machinesShow fewer
About this tool
Tool holder offset angle 90°, external coolant coolant. Fits 10 machines, including OKUMA ESL 10, OKUMA GENOS L 300 E M, OKUMA GENOS L 300 M MW.
All variants in this range
| Part no. | Availability | Quote |
|---|---|---|
| 05266400 | Made to order: typically a few weeks |