Madaula Tooling

The CA-0 is from Madaula's CA series, fixed at 90°, made in Barcelona. ER-25 / 16 mm output, 1:1 ratio, up to 6,000 rpm.

Drill, tap, ream or mill at an angle without repositioning the part. For machining centres, milling machines, machining units and transfer machines.

Tell us the machine, its spindle taper and the job, and we'll confirm the right one. Supplied to order, with the lead time confirmed on your quote.

The CA-1 is from Madaula's CA series, fixed at 90°, made in Barcelona. ER-32 output, 1:1 ratio, up to 3,000 rpm.

Drill, tap, ream or mill at an angle without repositioning the part. For machining centres, milling machines, machining units and transfer machines.

Tell us the machine, its spindle taper and the job, and we'll confirm the right one. Supplied to order, with the lead time confirmed on your quote.

The CA-2 is from Madaula's CA series, fixed at 90°, made in Barcelona. ER-40 or ISO 30 output, 1:1 ratio, up to 2,500 rpm.

Drill, tap, ream or mill at an angle without repositioning the part. For machining centres, milling machines, machining units and transfer machines.

Tell us the machine, its spindle taper and the job, and we'll confirm the right one. Supplied to order, with the lead time confirmed on your quote.

The CA-3 is from Madaula's CA series, fixed at 90°, made in Barcelona. ER-50 or ISO 40 output, 1:1 ratio, up to 2,000 rpm.

Drill, tap, ream or mill at an angle without repositioning the part. For machining centres, milling machines, machining units and transfer machines.

Tell us the machine, its spindle taper and the job, and we'll confirm the right one. Supplied to order, with the lead time confirmed on your quote.

The CA-3 Extended is from Madaula's CA series, fixed at 90°, made in Barcelona. ISO-40 output, 1:1 ratio, up to 2,000 rpm.

Drill, tap, ream or mill at an angle without repositioning the part. For machining centres, milling machines, machining units and transfer machines.

Tell us the machine, its spindle taper and the job, and we'll confirm the right one. Supplied to order, with the lead time confirmed on your quote.

The CA-4 is from Madaula's CA series, fixed at 90°, made in Barcelona. ISO-50 output, 1:1 ratio, up to 2,000 rpm.

Drill, tap, ream or mill at an angle without repositioning the part. For machining centres, milling machines, machining units and transfer machines.

Tell us the machine, its spindle taper and the job, and we'll confirm the right one. Supplied to order, with the lead time confirmed on your quote.

The CA-0C is from Madaula's CA series, fixed at 90°, made in Barcelona. ER-11 output, 1:1 ratio, up to 4,000 rpm.

Drill, tap, ream or mill at an angle without repositioning the part. For machining centres, milling machines, machining units and transfer machines.

Tell us the machine, its spindle taper and the job, and we'll confirm the right one. Supplied to order, with the lead time confirmed on your quote.

The CA-0E is from Madaula's CA series, fixed at 90°, made in Barcelona. ER-16A / 10 mm output, 1:1 ratio, up to 4,000 rpm.

Drill, tap, ream or mill at an angle without repositioning the part. For machining centres, milling machines, machining units and transfer machines.

Tell us the machine, its spindle taper and the job, and we'll confirm the right one. Supplied to order, with the lead time confirmed on your quote.

The CA-0IC is from Madaula's CA series, fixed at 90°, made in Barcelona. ER-25 / 16 mm output, 1:1 ratio, up to 6,000 rpm. Coolant runs through the input taper at up to 20 bar.

Drill, tap, ream or mill at an angle without repositioning the part. For machining centres, milling machines, machining units and transfer machines.

Tell us the machine, its spindle taper and the job, and we'll confirm the right one. Supplied to order, with the lead time confirmed on your quote.

The CA-1IC is from Madaula's CA series, fixed at 90°, made in Barcelona. ER-32 / 20 mm output, 1:1 ratio, up to 3,000 rpm. Coolant runs through the input taper at up to 20 bar.

Drill, tap, ream or mill at an angle without repositioning the part. For machining centres, milling machines, machining units and transfer machines.

Tell us the machine, its spindle taper and the job, and we'll confirm the right one. Supplied to order, with the lead time confirmed on your quote.

The CA-2IC is from Madaula's CA series, fixed at 90°, made in Barcelona. ER-40 / 26 mm output, 1:1 ratio, up to 2,500 rpm. Coolant runs through the input taper at up to 20 bar.

Drill, tap, ream or mill at an angle without repositioning the part. For machining centres, milling machines, machining units and transfer machines.

Tell us the machine, its spindle taper and the job, and we'll confirm the right one. Supplied to order, with the lead time confirmed on your quote.

The CA-3IC is from Madaula's CA series, fixed at 90°, made in Barcelona. ER-50 / 34 mm output, 1:1 ratio, up to 2,000 rpm. Coolant runs through the input taper at up to 20 bar.

Drill, tap, ream or mill at an angle without repositioning the part. For machining centres, milling machines, machining units and transfer machines.

Tell us the machine, its spindle taper and the job, and we'll confirm the right one. Supplied to order, with the lead time confirmed on your quote.

The CAR-0 is from Madaula's CAR series, adjustable from 0 to 90°, made in Barcelona. ER-16A / 10 mm output, 1:1 ratio, up to 8,000 rpm.

Drill, tap, ream or mill at an angle without repositioning the part. For machining centres, milling machines, machining units and transfer machines.

Tell us the machine, its spindle taper and the job, and we'll confirm the right one. Supplied to order, with the lead time confirmed on your quote.

The CAR-1L is from Madaula's CAR series, adjustable from 0 to 90°, made in Barcelona. ER-25 / 16 mm output, 1:1 ratio, up to 5,000 rpm.

Drill, tap, ream or mill at an angle without repositioning the part. For machining centres, milling machines, machining units and transfer machines.

Tell us the machine, its spindle taper and the job, and we'll confirm the right one. Supplied to order, with the lead time confirmed on your quote.

The CAR-1 is from Madaula's CAR series, adjustable from 0 to 90°, made in Barcelona. ER-25 / 16 mm output, 1:1 ratio, up to 4,000 rpm.

Drill, tap, ream or mill at an angle without repositioning the part. For machining centres, milling machines, machining units and transfer machines.

Tell us the machine, its spindle taper and the job, and we'll confirm the right one. Supplied to order, with the lead time confirmed on your quote.

The CAR-2 is from Madaula's CAR series, adjustable from 0 to 90°, made in Barcelona. ER-32 / 20 mm output, 1:1 ratio, up to 4,000 rpm.

Drill, tap, ream or mill at an angle without repositioning the part. For machining centres, milling machines, machining units and transfer machines.

Tell us the machine, its spindle taper and the job, and we'll confirm the right one. Supplied to order, with the lead time confirmed on your quote.

The CAR-3 is from Madaula's CAR series, adjustable from 0 to 90°, made in Barcelona. ER-40 / 26 mm output, 1:1 ratio, up to 3,500 rpm.

Drill, tap, ream or mill at an angle without repositioning the part. For machining centres, milling machines, machining units and transfer machines.

Tell us the machine, its spindle taper and the job, and we'll confirm the right one. Supplied to order, with the lead time confirmed on your quote.

The CAR-4 is from Madaula's CAR series, adjustable from 0 to 90°, made in Barcelona. ISO/BT-40 output, 1:1 ratio, up to 3,500 rpm.

Drill, tap, ream or mill at an angle without repositioning the part. For machining centres, milling machines, machining units and transfer machines.

Tell us the machine, its spindle taper and the job, and we'll confirm the right one. Supplied to order, with the lead time confirmed on your quote.

The CAR-5 is from Madaula's CAR series, adjustable from 0 to 90°, made in Barcelona. ISO/BT-50 output, 1:1 ratio, up to 3,000 rpm.

Drill, tap, ream or mill at an angle without repositioning the part. For machining centres, milling machines, machining units and transfer machines.

Tell us the machine, its spindle taper and the job, and we'll confirm the right one. Supplied to order, with the lead time confirmed on your quote.

The CAR-0IC is from Madaula's CAR series, adjustable from 0 to 90°, made in Barcelona. ER-16A / 10 mm output, 1:1 ratio, up to 8,000 rpm. Coolant runs through the input taper at up to 80 bar.

Drill, tap, ream or mill at an angle without repositioning the part. For machining centres, milling machines, machining units and transfer machines.

Tell us the machine, its spindle taper and the job, and we'll confirm the right one. Supplied to order, with the lead time confirmed on your quote.

The CAR-1IC is from Madaula's CAR series, adjustable from 0 to 90°, made in Barcelona. ER-25A / 16 mm output, 1:1 ratio, up to 4,000 rpm. Coolant runs through the input taper at up to 80 bar.

Drill, tap, ream or mill at an angle without repositioning the part. For machining centres, milling machines, machining units and transfer machines.

Tell us the machine, its spindle taper and the job, and we'll confirm the right one. Supplied to order, with the lead time confirmed on your quote.

The CAR-2IC is from Madaula's CAR series, adjustable from 0 to 90°, made in Barcelona. ER-32A / 20 mm output, 1:1 ratio, up to 4,000 rpm. Coolant runs through the input taper at up to 80 bar.

Drill, tap, ream or mill at an angle without repositioning the part. For machining centres, milling machines, machining units and transfer machines.

Tell us the machine, its spindle taper and the job, and we'll confirm the right one. Supplied to order, with the lead time confirmed on your quote.

The CAD-0 is from Madaula's CAD series, 90° with a double output, made in Barcelona. ER-25A / 16 mm output, 1:1 ratio, up to 5,000 rpm.

Drill, tap, ream or mill at an angle without repositioning the part. For machining centres, milling machines, machining units and transfer machines.

Tell us the machine, its spindle taper and the job, and we'll confirm the right one. Supplied to order, with the lead time confirmed on your quote.

The CAD-1 is from Madaula's CAD series, 90° with a double output, made in Barcelona. ER-32 / 20 mm output, 1:1 ratio, up to 3,000 rpm.

Drill, tap, ream or mill at an angle without repositioning the part. For machining centres, milling machines, machining units and transfer machines.

Tell us the machine, its spindle taper and the job, and we'll confirm the right one. Supplied to order, with the lead time confirmed on your quote.