Angle Heads Madaula Tooling

The CAD-2 is from Madaula's CAD series, 90° with a double output, made in Barcelona. ER-40 / 30 mm output, 1:1 ratio, up to 2,500 rpm.

Drill, tap, ream or mill at an angle without repositioning the part. For machining centres, milling machines, machining units and transfer machines.

Tell us the machine, its spindle taper and the job, and we'll confirm the right one. Supplied to order, with the lead time confirmed on your quote.

The CAD-3 is from Madaula's CAD series, 90° with a double output, made in Barcelona. ER-50 / 34 mm output, 1:1 ratio, up to 2,000 rpm.

Drill, tap, ream or mill at an angle without repositioning the part. For machining centres, milling machines, machining units and transfer machines.

Tell us the machine, its spindle taper and the job, and we'll confirm the right one. Supplied to order, with the lead time confirmed on your quote.

The CAF-0 is from Madaula's CAF series, fixed at an angle between 0 and 90° with extra rigidity, made in Barcelona. ER-16A / 10 mm output, 1:1 ratio, up to 8,000 rpm.

Drill, tap, ream or mill at an angle without repositioning the part. For machining centres, milling machines, machining units and transfer machines.

Tell us the machine, its spindle taper and the job, and we'll confirm the right one. Supplied to order, with the lead time confirmed on your quote.

The CAF-1 is from Madaula's CAF series, fixed at an angle between 0 and 90° with extra rigidity, made in Barcelona. ER-25 / 16 mm output, 1:1 ratio, up to 4,000 rpm.

Drill, tap, ream or mill at an angle without repositioning the part. For machining centres, milling machines, machining units and transfer machines.

Tell us the machine, its spindle taper and the job, and we'll confirm the right one. Supplied to order, with the lead time confirmed on your quote.

The CAF-2 is from Madaula's CAF series, fixed at an angle between 0 and 90° with extra rigidity, made in Barcelona. ER-32 / 20 mm output, 1:1 ratio, up to 4,000 rpm.

Drill, tap, ream or mill at an angle without repositioning the part. For machining centres, milling machines, machining units and transfer machines.

Tell us the machine, its spindle taper and the job, and we'll confirm the right one. Supplied to order, with the lead time confirmed on your quote.

The CAF-3 is from Madaula's CAF series, fixed at an angle between 0 and 90° with extra rigidity, made in Barcelona. ER-40 / 26 mm output, 1:1 ratio, up to 3,500 rpm.

Drill, tap, ream or mill at an angle without repositioning the part. For machining centres, milling machines, machining units and transfer machines.

Tell us the machine, its spindle taper and the job, and we'll confirm the right one. Supplied to order, with the lead time confirmed on your quote.

The CAFS-0 is from Madaula's CAFS series, fixed at an angle between 0 and 90° with extra rigidity, made in Barcelona. ER-16 / 10 mm output, 1:1 ratio, up to 8,000 rpm.

Drill, tap, ream or mill at an angle without repositioning the part. For machining centres, milling machines, machining units and transfer machines.

Tell us the machine, its spindle taper and the job, and we'll confirm the right one. Supplied to order, with the lead time confirmed on your quote.

The CAFS-1 is from Madaula's CAFS series, fixed at an angle between 0 and 90° with extra rigidity, made in Barcelona. ER-25 / 16 mm output, 1:1 ratio, up to 4,000 rpm.

Drill, tap, ream or mill at an angle without repositioning the part. For machining centres, milling machines, machining units and transfer machines.

Tell us the machine, its spindle taper and the job, and we'll confirm the right one. Supplied to order, with the lead time confirmed on your quote.

The CAFS-2 is from Madaula's CAFS series, fixed at an angle between 0 and 90° with extra rigidity, made in Barcelona. ER-32 / 20 mm output, 1:1 ratio, up to 4,000 rpm.

Drill, tap, ream or mill at an angle without repositioning the part. For machining centres, milling machines, machining units and transfer machines.

Tell us the machine, its spindle taper and the job, and we'll confirm the right one. Supplied to order, with the lead time confirmed on your quote.

The CAFS-3 is from Madaula's CAFS series, fixed at an angle between 0 and 90° with extra rigidity, made in Barcelona. ER-40 / 26 mm output, 1:1 ratio, up to 3,500 rpm.

Drill, tap, ream or mill at an angle without repositioning the part. For machining centres, milling machines, machining units and transfer machines.

Tell us the machine, its spindle taper and the job, and we'll confirm the right one. Supplied to order, with the lead time confirmed on your quote.

The CAFS-0IC is from Madaula's CAFS series, fixed at an angle between 0 and 90° with extra rigidity, made in Barcelona. ER-16 / 10 mm output, 1:1 ratio, up to 8,000 rpm. Coolant runs through the input taper at up to 80 bar.

Drill, tap, ream or mill at an angle without repositioning the part. For machining centres, milling machines, machining units and transfer machines.

Tell us the machine, its spindle taper and the job, and we'll confirm the right one. Supplied to order, with the lead time confirmed on your quote.

The CAFS-1IC is from Madaula's CAFS series, fixed at an angle between 0 and 90° with extra rigidity, made in Barcelona. ER-25 / 16 mm output, 1:1 ratio, up to 4,000 rpm. Coolant runs through the input taper at up to 80 bar.

Drill, tap, ream or mill at an angle without repositioning the part. For machining centres, milling machines, machining units and transfer machines.

Tell us the machine, its spindle taper and the job, and we'll confirm the right one. Supplied to order, with the lead time confirmed on your quote.

The CAFS-2IC is from Madaula's CAFS series, fixed at an angle between 0 and 90° with extra rigidity, made in Barcelona. ER-32 / 20 mm output, 1:1 ratio, up to 4,000 rpm. Coolant runs through the input taper at up to 80 bar.

Drill, tap, ream or mill at an angle without repositioning the part. For machining centres, milling machines, machining units and transfer machines.

Tell us the machine, its spindle taper and the job, and we'll confirm the right one. Supplied to order, with the lead time confirmed on your quote.

The CAFS-3IC is from Madaula's CAFS series, fixed at an angle between 0 and 90° with extra rigidity, made in Barcelona. ER-40 / 26 mm output, 1:1 ratio, up to 3,500 rpm. Coolant runs through the input taper at up to 80 bar.

Drill, tap, ream or mill at an angle without repositioning the part. For machining centres, milling machines, machining units and transfer machines.

Tell us the machine, its spindle taper and the job, and we'll confirm the right one. Supplied to order, with the lead time confirmed on your quote.